© Copyright 1986-2002 by The University of Washington. Written by Joseph Felsenstein. Permission is granted to copy this document provided that no fee is charged for it and that this copyright notice is not removed.
DRAWTREE and DRAWGRAM are interactive tree-plotting programs that take a tree description in a file and read it, and then let you interactively make various settings and then plot the tree on a laser printer, plotter, or dot matrix printer. In many cases (with Macintosh or PC graphics, with X windows, or with a Tektronix-compatible graphics terminal) you can preview the resulting tree. This allows you to modify the tree until you like the result, then plot the result. DRAWTREE plots unrooted trees and DRAWGRAM plots rooted cladograms and phenograms. On good laser printers or as files for good drawing programs both can produce fully publishable results. On dot matrix printers the results look grainy but are good enough for overhead transparencies or slides for presentations.
These programs are descended from PLOTGRAM and PLOTREE written by Christopher Meacham. I have incorporated his code for fonts and his plotter drivers, and in DRAWTREE have used some of his code for drawing unrooted trees. In both programs I have also included some plotter driver code by David Swofford, Julian Humphries and George D.F. "Buz" Wilson, to all of whom I am very grateful. Mostly, however, they consist of my own code and that of my programmers. The font files are printable-character recodings of the public-domain Hershey fonts, recoded by Christopher Meacham.
This document will describe the features common to both programs. The documents for DRAWTREE and DRAWGRAM describe the particular choices you can make in each of those programs. The Appendix to this documentation file contains some pieces of C code that can be inserted to make the program handle another plotting device -- the plotters by Calcomp.
To use DRAWTREE and DRAWGRAM, you must have
Once you have all these, the programs should be fairly self explanatory, particular if you can preview your plots so that you can discover the meaning of the different options by trying them out.
Once you have a compiled version of the appropriate program, say DRAWGRAM, and a file called (say) treefile with the tree in it, and a font file (say font2 which you have copied as a file called fontfile), all you do is run the program DRAWGRAM. It should automatically read the font and tree files, and will allow you to change the graphics devices. Then it will let you see the options it has chosen, and ask you if you want to change these. Once you have modified those that you want to, you can tell it to accept those. The program will then allow you to preview the tree on your screen, if you have told it that you have an appropriate graphics screen. After previewing the tree, the program will want to know whether you are ready to plot the tree. In Windows you answer this using the File menu of the preview window. In X Windows and Macintosh systems you can close the preview window by clicking on its corner. Whether or not you close it, if you get back to the text window that had the menus, and it accepts typing in that window, you will be asked whether you want to accept the plot as is. If you say no, it will once again allow you to change options and will the allow you to preview the tree again, and so on as many times as you want. If you say yes, then it will write a file called (say) plotfile. If you then copy this file to your printer or plotter, it should result in a beautifully plotted tree. If the final plotting device is a Macintosh or PC graphics screen, it may not write a plot file but will plot directly on the screen.
Having read the above, you may be ready to run the program. Below you Will find more information about representation of trees in the tree file, on the different kinds of graphics devices supported by this program, and on how to recompile these programs.
The Newick Standard for representing trees in computer-readable form makes use of the correspondence between trees and nested parentheses, noticed in 1857 by the famous English mathematician Arthur Cayley. If we have this rooted tree:
A D
\ E /
\ C / /
\ ! / /
\ ! / /
B \!/ /
\ o /
\ ! /
\ ! /
\ ! /
\ ! /
\!/
o
!
!
then in the tree file it is represented by the following sequence of printable characters, starting at the beginning of the file:
(B,(A,C,E),D);
The tree ends with a semicolon. Everything after the semicolon in the input file is ignored, including any other trees. The bottommost node in the tree is an interior node, not a tip. Interior nodes are represented by a pair of matched parentheses. Between them are representations of the nodes that are immediately descended from that node, separated by commas. In the above tree, the immediate descendants are B, another interior node, and D. The other interior node is represented by a pair of parentheses, enclosing representations of its immediate descendants, A, C, and E.
Tips are represented by their names. A name can be any string of printable characters except blanks, colons, semcolons, parentheses, and square brackets. In the programs a maximum of 20 characters are allowed for names: this limit can easily be increased by recompiling the program and changing the constant declaration for "MAXNCH" in phylip.h.
Because you may want to include a blank in a name, it is assumed that an underscore character ("_") stands for a blank; any of these in a name will be converted to a blank when it is read in. Any name may also be empty: a tree like
(,(,,),);
is allowed. Trees can be multifurcating at any level (while in many of the programs multifurcations of user-defined trees are not allowed or restricted to a trifurcation at the bottommost level, these programs do make any such restriction).
Branch lengths can be incorporated into a tree by putting a real number, with or without decimal point, after a node and preceded by a colon. This represents the length of the branch immediately below that node. Thus the above tree might have lengths represented as:
(B:6.0,(A:5.0,C:3.0,E:4.0):5.0,D:11.0);
These programs will be able to make use of this information only if lengths exist for every branch, except the one at the bottom of the tree.
The tree starts on the first line of the file, and can continue to subsequent lines. It is best to proceed to a new line, if at all, immediately after a comma. Blanks can be inserted at any point except in the middle of a species name or a branch length.
The above description is of a subset of the Newick Standard. For example, interior nodes can have names in that standard, but if any are included the present programs will omit them.
To help you understand this tree representation, here are some trees in the above form:
((raccoon:19.19959,bear:6.80041):0.84600,((sea_lion:11.99700, seal:12.00300):7.52973,((monkey:100.85930,cat:47.14069):20.59201, weasel:18.87953):2.09460):3.87382,dog:25.46154);(Bovine:0.69395,(Gibbon:0.36079,(Orang:0.33636,(Gorilla:0.17147,(Chimp:0.19268, Human:0.11927):0.08386):0.06124):0.15057):0.54939,Mouse:1.21460);
(Bovine:0.69395,(Hylobates:0.36079,(Pongo:0.33636,(G._Gorilla:0.17147, (P._paniscus:0.19268,H._sapiens:0.11927):0.08386):0.06124):0.15057):0.54939, Rodent:1.21460);
();
((A,B),(C,D));
(Alpha,Beta,Gamma,Delta,,Epsilon,,,);
The Newick Standard was adopted June 26, 1986 by an informal committee meeting during the Society for the Study of Evolution meetings in Durham, New Hampshire and consisting of James Archie, William H.E. Day, Wayne Maddison, Christopher Meacham, F. James Rohlf, David Swofford, and myself. A web page describing it will be found at http://evolution.gs.washington.edu/phylip/newicktree.html.
When the programs run they have a menu which allows you to set (on its option P) the final plotting device, and another menu which allows you to set the type of preview screen. The choices for previewing are a subset of those available for plotting, and they can be different (the most useful combination will usually be a previewing graphics screen with a hard-copy plotter or a drawing program graphics file format).
The plotting device menu looks like this:
type: to choose one compatible with:
L Postscript printer file format
M PICT format (for drawing programs)
J HP Laserjet PCL file format
W MS-Windows Bitmap
F FIG 2.0 drawing program format
A Idraw drawing program format
Z VRML Virtual Reality Markup Language file
P PCX file format (for drawing programs)
K TeKtronix 4010 graphics terminal
X X Bitmap format
V POVRAY 3D rendering program file
R Rayshade 3D rendering program file
H Hewlett-Packard pen plotter (HPGL file format)
D DEC ReGIS graphics (VT240 terminal)
E Epson MX-80 dot-matrix printer
C Prowriter/Imagewriter dot-matrix printer
T Toshiba 24-pin dot-matrix printer
O Okidata dot-matrix printer
B Houston Instruments plotter
U other: one you have inserted code for
Choose one:
|
Here are the choices, with some comments on each:
Postscript printer file format. This means that the program will generate a file containing Postscript commands as its plot file. This can be printed on any Postscript-compatible laser printer. The page size is assumed to be 8.5 by 11 inches, but as plotting is within this limit A4 metric paper should work well too. This is the best quality output option. For this printer the menu options in DRAWGRAM and DRAWTREE that allow you to select one of the built-in fonts will work. The programs default to Times-Roman when this plotting option is in effect. I have been able to use fonts Courier, Times-Roman, and Helvetica. The others have eluded me for some reason known only to those who really understand Postscript.
If your laser printer, supposedly Postcript-compatible, refuses to print the plot file, you might consider whether the first line of the plot file, which starts with %! needs to be altered somehow or eliminated. If your Laserwriter is hooked to a Macintosh it will be necessary to persuade it to print the plot file. In recent versions of the Macintosh operating systems this can supposedly be done by dragging the file icon onto the printer icon on the desktop. In earlier versions of the MacOS operating system you might have to use a utility called the Laserwriter Font Utility, which was distributed with the operating system.
PICT format (for drawing programs). This file format is read by many drawing programs (an early example was MacDraw). It has support for some fonts, though if fonts are used the species names can only be drawn horizontally or vertically, not at other angles in between. The control over line widths is a bit rough also, so that some lines at different angles may turn out to be different widths when you do not want them to be. If you are working on a Macintosh system and have not been able to persuade it to print a Postscript file, this option may be the best solution, as you could then read the file into a drawing program and then order it to print the resulting screen. The PICT file format has font support, and the default font for this plotting option is set to Times. You can also choose font attributes for the labels such as Bold, Italic, Outline, and Shadowed.
HP Laserjet PCL file format. Hewlett-Packard's extremely popular line of laser printers has been emulated by many other brands of laser printer, so that this format is compatible with more printers than any other. One limitation of the PCL4 command language for these printers is that it does not have primitive operations for drawing arbitrary diagonal lines. This means that they must be treated by these programs as if they were dot matrix printers with a great many dots. This makes output files large, and output can be slow. The user will be asked to choose the dot resoluton (75, 150, or 300 dots per inch). The 300 dot per inch setting should not be used if the laser printer's memory is less than 512k bytes. The quality of output is also not as good as it might be so that the Postscript file format will usually produce better results even at the same resolution. I am grateful to Kevin Nixon for inadvertently pointing out that on Laserjets one does not have to dump the complete bitmap of a page to plot a tree.
MS-Windows Bitmap. This file format is used by most Windows drawing and paint programs, including Windows Paint which comes with the Windows operating system. It asks you to choose the height and width of the graphic image in pixels. For the moment, the image is set to be a monochrome image which can only be black or white. We hope to change that soon, but note that by pasting the image into a copy of Paint that is set to have a color image of the appropriate size, one can get a version whose color can be changed. Note also that Windows Bitmap files can be used as "wallpaper" images for the background of a desktop.
IBM PC graphics screens. The code for this in the programs is available in the precompiled PC executables or if you compile the programs yourself in C. The graphics modes supported are CGA, EGA, VGA, Hercules, and AT&T (Olivetti). This option is also available for previewing plots, and in either previewing or final plotting it draws directly on the screen and does not make a plot file.
FIG 2.0 drawing program format. This is the file format of the free drawing program Xfig, available for X-windows systems on Unix or Linux systems. Xfig can be obtained from http://duke.usask.ca/~macphed/soft/fig/
You should also get transfig, which contains the fig2dev program which converts xfig output to the various printer languages. Transfig is on the same machine in
/contrib/R5fixes/transfig-patches/transfig.2.1.6.tar.Z.
The present format does not write the species labels in fonts recognized by Xfig but draws them with lines. This often makes the names look rather bumpy. We hope to change this soon.
Idraw drawing program format. Idraw is a free drawing program for X windows systems (such as Unix and Linux systems). Its interface is loosely based on MacDraw, and I find it much more useable than Xfig. Though it was unsupported for a number of years, it has more recently been actively supported by Scott Johnston, of Vectaport, Inc. (http://www.vectaport.com). He has produced, in his ivtools package, a number of specialized versions of Idraw, and he also distributes the original Idraw as part of it. Linux executables for all these are available from Vectaport, or from various archive machines.
The Idraw file format that our programs produce can be read into Idraw, or can be imported into the other Ivtools programs. The file format saved from Idraw (or which can be exported from the other Ivtools programs) is Postscript, and if one does not print directly from Idraw one can simply send the file to the printer. But the format we produce is missing some of the header information and will not work directly as a Postscript file. However if you read it into Idraw and then save it (or import it into one of the other Ivtools programs and then export it) you will get a Postscript version that is fully useable.
DRAWGRAM and DRAWTREE have font support in their Idraw file format options. The default font is Times-Bold but you can also enter the name of any other font that is supported by your Postscript printer. Idraw labels can be rotated to any angle.
VRML Virtual Reality Markup Language file. This is by far the most interesting plotting file format. VRML files describe objects in 3-dimensional space with lighting on them. A number of freely available "virtual reality browsers" such as Cosmo Player can read VRML files. A list of available virtual reality browsers and browser plugins can be found at http://www.web3d.org/vrml/browpi.htm. These allow you to wander around looking at the tree from various angles, including from behind! At the moment our VRML output is primitive, with labels that always look the same no matter what angle you look at them from, and with a "sun" that is always behind you. The tree is made of three-dimensional tubes but is basically flat. We hope to change these soon. What's next? Trees whose branches stick out in three dimensions? Animated trees whose forks rotate slowly? A video game involving combat among schools of systematists?
PCX file format (for drawing programs). A bitmap format that was formerly much used on the PC platform, this has been largely superseded by the Windows Bitmap (BMP) format, but it is still useful. This file format is simple and is read by many other programs as well. The user must choose one of three resolutions for the file, 640x480, 800x600, or 1024x768. The file is a monochrome paint file. Our PCX format is correct but is not read correctly by versions of Microsoft Paint (PBrush) that are running on systems that have loaded Word97.
Tektronix 4010 graphics terminal. The plot file will contain commands for driving the Tektronix series of graphics terminals. Other graphics terminals were compatible with the Tektronix 4010 and its immediate descendants. The PCDOS version of the public domain communications program Kermit, versions 2.30 and later, can emulate a Tektronix graphics terminal if the command "set terminal tek" is given. Of course that assumes that you are communicating with another computer. There are also similar terminal emulation programs for Macintoshes that emulate Tektronix graphics. On workstations with X windows you can use one option of the "xterm" utility to create a Tektronix-compatible window. On Sun workstations there used to be a Tektronix emulator you can run called "tektool" which can be used to view the trees. The Tektronix option is also available in our programs for previewing the plots, in which case the plotting commands will be not be written into a file but will be sent directly to your terminal.
X Bitmap format. This produces an X-bitmap for the X Windows system on Unix or Linux systems, which can be displayed on X screens. You will be asked for the size of the bitmap (e.g., 16x16, or 256x256, etc.). This format cannot be printed out without further format conversion but is usable for backgrounds of windows ("wallpaper"). This can be a very bulky format if you choose a large bitmap. The bitmap is a structure that can actually be compiled into a C program (and thus built in to it), if you should have some reason for doing that.
POVRAY 3D rendering program file. This produces a file for the free ray-tracing program POVRay (Persistence of Vision Raytracer), which is available at http://www.povray.org/. It shows a tree floating above a flat landscape. The tree is flat but made out of tubes (as are the letters of the species names). It casts a realistic shadow across the landscape. lit from over the left shoulder of the viewer. You will be asked to confirm the colors of the tree branches, the species names, the background, and the bottom plane. These default to Blue, Yellow, White, and White respectively.
Rayshade 3D rendering program file. The input format for the free ray-tracing program "rayshade" which is available at http://www-graphics.stanford.edu/~cek/rayshade/rayshade.html for many kinds of systems. Rayshade takes files of this format and turns them into color scenes in "raw" raster format (also called "MTV" format after a raytracing program of that name). If you get the pbmplus package (available from http://sourceforge.net/projects/netpbm/). and compile it on your system you can use the "mtvtoppm" and "ppmtogif" programs to convert this into the widely-used GIF raster format. (the pbmplus package will also allow you to convert into tiff, pcx and many other formats) The resultant image will show a tree floating above a landscape, rendered in a real-looking 3-dimensional scene with shadows and illumination. It is possible to use Rayshade to make two scenes that together are a stereo pair. When producing output for Rayshade you will be asked by the DRAWGRAM or DRAWTREE whether you want to reset the values for the colors you want for the tree, the species names, the background, and the desired resolution.
Hewlett-Packard pen plotter (HPGL file format). This means that the program will generate a file as its plot file which uses the HPGL graphics language. Hewlett-Packard 7470, 7475, and many other plotters are compatible with this. The paper size is again assumed to be 8.5 by 11 inches (again, A4 should work well too). It is assumed that there are two pens, a finer one for drawing names, and the HPGL commands will call for switching between these. The Hewlett-Packard Laserjet III printer can emulate an HP plotter, and this feature is included in its PCL5 command language (but not in the PCL4 command languages of earlier Hewlett-Packard models). As plotters are now rare the main use of HPGL will be when they are emulated by laser printers, but other file formats such as PCL and Postscript will be better choices in those cases.
DEC ReGIS graphics (VT240 terminal). The DEC ReGIS standard is used by the VT240 and VT340 series terminals by DEC (Digital Equipment Corporation). There used to be many graphics terminals that emulate the VT240 or VT340 as well. The DECTerm windows in many versions of Digital's (now Compaq's) DECWindows windowing system do so. This option is available in our programs for previewing trees as well. In preview mode it does not write a plot file but sends the commands directly to the screen; in final mode it writes a plot file. In DEC's version of Unix, Ultrix version 4.1 and later, the windowing system allows DEC ReGIS graphics as a default.
Epson MX-80 dot-matrix printer. This file format is for the dot-matrix printers by Epson (starting with the MX80 and continuing on to many other models), as well as the IBM Graphics printers. The code here plots in double-density graphics mode. Many of the later models are capable of higher-density graphics but not with every dot printed. This density was chosen for reasonably wide compatibility. Many other dot-matrix printers on the market have graphics modes compatible with the Epson printers. I cannot guarantee that the plot files generated by these programs will be compatible with all of these, but they do work on Epsons. They have also worked, in our hands, on IBM Graphics Printers. There used to be many printers that claimed compatibility with these too, but I do not know whether it will work on all of them. If you have trouble with any of these you might consider trying in the epson option of procedure initplotter to put in a fprintf statement that writes to plotfile an escape sequence that changes line spacing. As dot matrix printers are rare these days, I suspect this option will not get much testing.
Prowriter/Imagewriter dot-matrix printer. The trading firm C. Itoh distributed this line of dot-matrix printers, which was made by Tokyo Electric (TEC) and also was sold by NEC under the product number PC8023. These were 9-pin dot matrix printers. In a slightly modified form they were also the Imagewriter printer sold by Apple for their Macintosh line. The same escape codes seem to work on both machines, the Apple version being a serial interface version. They are not related to the IBM Proprinter, despite the name.
Toshiba 24-pin dot-matrix printer. The 24-pin printers from Toshiba were covered by this option. These included the P1340, P1350, P1351, P351, 321, and later models. For a 24-pin printer the plot file can get fairly large as it contains a bit map of the image and there are more bits with a 24-pin image. Printing was usually slow.
Okidata dot-matrix printer. The ML81, 82, 83 and ML181, 182, 183 line of dot-matrix printers from Okidata had their own graphics codes and those are dealt with by this option. The later Okidata ML190 series emulated IBM Graphics Printers so that you would not want to use this option for them but the option for that printer.
Houston Instruments plotter. The Houston Instruments line of plotters were also known as Bausch and Lomb plotters. The code in the programs for these has not been tested recently; I would appreciate anyone who tries it out telling me whether it works. I do not have access to such a plotter myself, and doubt most users will come across one.
Conversion from these formats to others is also possible. There is a free program by Jef Poskanzer called "PBMPLUS" that interconverts many bitmap formats (see above under Rayshade).
Plots may be previewed in a number of formats which are chosen using the menu option. Previewing defaults to different drivers depending on which kind of system you are running the programs on. For Unix or Linux systems it defaults to X Windows, for Windows systems to Windows graphics, and for Macintosh systems to macintosh graphics screens.
We have already mentioned (above) some of the options that are also used for previewing. These include:
MSDOS Graphics Screens. These were mentioned above as possible output images.
Macintosh graphics screens. Using the windowing features of Codewarrior C from Metrowerks, our Macintosh executables open a graphics window and draw preview trees in it. We have not provided this option for final plotting of the tree. The window is about 2/3 the height of the desktop screen and has the tree drawn in black on a white background. After the preview appears, you can dismiss the window by closing it using the usual little box in its corner, or by typing Command-Q.
X Windows display. Our Unix and Linux code tries to do previews in X Windows. We hope that the Unix/Linux Makefle will find the correct libraries to link from. An X window appears with the preview of the tree in it. To dismiss this window one needs to put the mouse over the text window that had the menus in it (or click on them) and then type Y or N to plot the tree or return to the menu.
MS Windows display. The executables produced using the Cygwin Gnu C++ compiler should produce this graphics preview window. The preview window can be dismissed using its File menu. In its menu the Change Parameters otion will lead you back to the text menu to make more changes, and the Plot option will cause the final plot file to be written. The Quit option will interrupt the program, causing no plot file to b produced. Normally you will not want to use that option.
Tektronix 4010 graphics terminal. This previewing option was described above as a final plot option.
DEC ReGIS graphics (VT240 terminal). This previewing option was described above as a final plot option.
A problem may arose in how to get the plot files to the plotting device or printer. One has to copy them directly, but one should be careful to not let your serial or parallel port strip off the high-order bits in the bytes if you are using one of the options that generate nonprintable characters. This will be true for most of the dot matrix printers and for bitmaps dumped to an HP Laserjet-compatible printer. This can be a problem under Unix or MSDOS. If, for example, you have a dot-matrix printer connected to a parallel port under PCDOS, to copy the file PLOTFILE to the printer without losing the high-order bits, you must use the /B switch on the COPY command:
COPY/B PLOTFILE PRN:
A problem that may occur under some operating systems, particularly the VMS operating system for Digital VAXes, is having a plot file with lines that exceed some operating system limit such as 255 characters. This can happen if you are using the Tektronix option. You should set your terminal type with the command
$ SET TERM/NOWRAP/ESCAPE
Another problem is adding labels (such as vertical scales and branch lengths) to the plots produced by this program. This may require you to use the BMP, PICT, Idrawm, Xfig, PCX or Postscript file format and use a draw or paint program to add them.
I would like to add more fonts. The present fonts are recoded versions of the Hershey fonts. They are legally publicly distributable. Most other font families on the market are not public domain and I cannot afford to license them for distribution. Some people have noticed that the Hershey fonts, which are drawn by a series of straight lines, have noticeable angles in what are supposed to be curves, when they are printed on modern laser printers and looked at closely. This is less a problem than one might think since, fortunately, when scientific journals print a tree it is usually shrunk so small that these imperfections (and often the tree itself) are hard to see!
One more font that could be added from the Hershey font collection would be a Greek font. If Greek users would find that useful I could add it, but my impression is that they publish mostly in English anyway.
The C version of these programs consists of two C programs, "drawgram.c" and "drawtree.c". Each of these has common sections of code compiled into it called "draw.c", "draw2.c" and a common header file, "draw.h". In addition the Macintosh version requires two more files, "interface.c" and "interface.h". All of the graphics commands that are common to both programs will be found in "draw.c" and "draw2.c". The following instructions for writing your own code to drive a different kind of printer, plotter, or graphics file format, require you only to make changes in "drawgraphics.c". The two programs can then be recompiled.
If you want to write code for other printers, plotters, or vector file formats, this is not too hard. The plotter option "U" is provided as a place for you to insert your own code. Chris Meacham's system was to draw everything, including the characters in the names and all curves, by drawing a series of straight lines. Thus you need only master your plotter's commands for drawing straight lines. In function "plotrparms" you must set up the values of variables "xunitspercm" and "yunitspercm", which are the number of units in the x and y directions per centimeter, as well as variables "xsize" and "ysize" which are the size of the plotting area in centimeters in the x direction and the y direction. A variable "penchange" of a user-defined type is set to "yes" or "no" depending on whether the commands to change the pen must be issued when switching between plotting lines and drawing characters. Even though dot-matrix printers do not have pens, penchange should be set to "yes" for them. In function "plot" you must issue commands to draw a line from the current position (which is at (xnow, ynow) in the plotter's units) to the position (xabs, yabs), under the convention that the lower-left corner of the plotting area is (0.0, 0.0). In functions "initplotter" and "finishplotter" you must issue commands to initialize the plotter and to finish plotting, respectively. If the pen is to be changed an appropriate piece of code must be inserted in function "penchange".
For dot matrix printers and raster graphics matters are a bit more complex. The functions "plotrparms", "initplotter", "finishplotter" and "plot" still respectively set up the parameters for the plotter, initialize it, finish a plot, and plot one line. But now the plotting consists of drawing dots into a two-dimensional array called "stripe". Once the plot is finished this array is printed out. In most cases the array is not as tall as a full plot: instead it is a rectangular strip across it. When the program has finished drawing in ther strip, it prints it out and then moves down the plot to the next strip. For example, for Hewlett-Packard Laserjets we have defined the strip as 2550 dots wide and 20 dots deep. When the program goes to draw a line, it draws it into the strip and ignores any part of it that falls outside the strip. Thus the program does a complete plotting into the strip, then prints it, then moves down the diagram by (in this case) 20 dots, then does a complete plot into that strip, and so on.
To work with a new raster or dot matrix format, you will have to define the desired width of a strip ("strpwide"), the desired depth ("strpdeep"), and how many lines of bytes must be printed out to print a strip. For example Toshiba P351 printers in graphics mode print strips of dots 1350 bits wide by 24 bits deep, each column of 24 bits printing out as consecutive four bytes with 6 bits each. In that case, one prints out a strip by printing up to 1350 groups of 4 bytes. "strpdiv" is 4, and "strpwide" is 1350, and "strpdeep" is 24. Procedure "striprint" is the one that prints out a strip, and has special-case code for the different printers and file formats. For file formats, all of which print out a single row of dots at a time, the variable "strpdiv" is not used. The variable "dotmatrix" is set to "true" or "false" in function "plotrparms" according to whether or not "strpdiv" is to be used. Procedure "plotdot" sets a single dot in the array "strip" to 1 at position (xabs, yabs). The coordinates run from 1 at the top of the plot to larger numbers as we proceed down the page. Again, there is special-case code for different printers and file formats in that function. You will probably want to read the code for some of the dot matrix or file format options if you want to write code for one of them. Many of them have provision for printing only part of a line, ignoring parts of it that have no dots to print.
I would be happy to obtain the resulting code from you to consider adding it to this listing so we can cover more kinds of plotters, printers, and file formats.
Calcomp's industrial-strength plotters are not as much a fixture of University computer centers as they one were, but just in case you need to use one, this code should work:
A global declaration needed near the front of drawtree.c:
Char cchex[16];
Code to be inserted into function plotrparms:
case 'Y':
plotter = other;
xunitspercm = 39.37;
yunitspercm = 39.37;
xsize = 25.0;
ysize = 25.0;
xposition = 12.5;
yposition = 0.0;
xoption = center;
yoption = above;
rotation = 0.0;
break;
Code to be inserted into function plot:
Declare these variables at the beginning of the function:
long n, inc, xinc, yinc, xlast, ylast, xrel, yrel, xhigh, yhigh, xlow, ylow; Char quadrant;
and insert this into the switch statement:
case other:
if (penstatus == pendown)
putc('H', plotfile);
else
putc('D', plotfile);
xrel = (long)floor(xabs + 0.5) - xnow;
yrel = (long)floor(yabs + 0.5) - ynow;
xnow = (long)floor(xabs + 0.5);
ynow = (long)floor(yabs + 0.5);
if (xrel > 0) {
if (yrel > 0)
quadrant = 'P';
else
quadrant = 'T';
} else if (yrel > 0)
quadrant = 'X';
else
quadrant = '1';
xrel = labs(xrel);
yrel = labs(yrel);
if (xrel > yrel)
n = xrel / 255 + 1;
else
n = yrel / 255 + 1;
xinc = xrel / n;
yinc = yrel / n;
xlast = xrel % n;
ylast = yrel % n;
xhigh = xinc / 16;
yhigh = yinc / 16;
xlow = xinc & 15;
ylow = yinc & 15;
for (i = 1; i <= n; i++)
fprintf(plotfile, "%c%c%c%c%c",
quadrant, cchex[xhigh - 1], cchex[xlow - 1], cchex[yhigh - 1],
cchex[ylow - 1]);
if (xlast != 0 || ylast != 0)
fprintf(plotfile, "%c%c%c%c%c",
quadrant, cchex[-1], cchex[xlast - 1], cchex[-1],
cchex[ylast - 1]);
break;
Code to be inserted into function initplotter:
case other:
cchex[-1] = 'C';
cchex[0] = 'D';
cchex[1] = 'H';
cchex[2] = 'L';
cchex[3] = 'P';
cchex[4] = 'T';
cchex[5] = 'X';
cchex[6] = '1';
cchex[7] = '5';
cchex[8] = '9';
cchex[9] = '/';
cchex[10] = '=';
cchex[11] = '#';
cchex[12] = '"';
cchex[13] = '\'';
cchex[14] = '^';
xnow = 0.0;
ynow = 0.0;
fprintf(plotfile, "CCCCCCCCCC");
break;
Code to be inserted into function finishplotter:
case other:
plot(penup, 0.0, yrange + 50.0);
break;